Existing roof cover
Note: The modules should NOT be placed in the outer column/row of the roof. Always leave minimum of 1 column/row of roof tiles in place in order to ensure watertight transition for fascias and dry verge caps.
1. Remove the right amount of tiles according to planned layout and size of the system.
2. Check the condition and integrity of existing battens.
3. Make sure the existing waterproofing layer is functional.
4. Place the metal U-bracket to rafters and fasten with self-tapping screws.
5. Start from the bottom row left and place the SolarStone module onto the batten and fit the module into interlocking brackets attached underneath.
6. Use 6cm self-tapping screws to secure the module in place. The module should interlock neatly with the adjacent roof tile.
7. Make sure the connectors from the junction box are not entangled.
8. Place next module onto the batten above and plug the connectors according to the specifications.
9. Place all the modules making sure all the connectors are properly plugged.
10. Connect the wirings to the inverter according to the inverter manual.
BIPV SolarStone system is ready to power your home.
Note: The modules should NOT be placed in the outer column/row of the roof. Always leave minimum of 1 column/row of roof tiles in place in order to ensure watertight transition for fascias and dry verge caps.
1. Remove the right amount of tiles according to planned layout and size of the system.
2. Check the condition and integrity of existing battens.
3. Make sure the existing waterproofing layer is functional.
4. Place the metal U-bracket to rafters and fasten with self-tapping screws.
5. Start from the bottom row left and place the SolarStone module onto the batten and fit the module into interlocking brackets attached underneath.
6. Use 6cm self-tapping screws to secure the module in place. The module should interlock neatly with the adjacent roof tile.
7. Make sure the connectors from the junction box are not entangled.
8. Place next module onto the batten above and plug the connectors according to the specifications.
9. Place all the modules making sure all the connectors are properly plugged.
10. Connect the wirings to the inverter according to the inverter manual.
BIPV SolarStone system is ready to power your home.
New roof
Note: The modules should NOT be placed in the outer column/row of the roof. Double check there is enough room for minimum of 1 column/row of roof tiles. This is vital for proper framing of fascias and installing factory made dry verge caps.
1. Make sure the waterproofing layer is functional.
2. Make sure the layout of the roof accommodates the desired amount of SolarStone modules. Install the bottom row(s) of regular roof tiles according to the design layout.
3. Place the metal U-bracket to rafters and fasten with self-tapping screws.
4. Start from the bottom left row and place the SolarStone module onto the batten and fit the module into interlocking brackets attached underneath.
5. Use 6cm self-tapping screws to secure the module in place. The module should interlock neatly with the adjacent roof tile.
6. Make sure the connectors from the junction box are not entangled.
7. Place another module onto the batten above and plug the connectors according to the specifications.
8. Place all the modules making sure all the connectors are properly plugged.
9. Finalise the rightmost column(s) with roof tiles.
10. Connect the wirings to the inverter according to the inverter manual.
BIPV SolarStone system is ready to power your home.
Note: The modules should NOT be placed in the outer column/row of the roof. Double check there is enough room for minimum of 1 column/row of roof tiles. This is vital for proper framing of fascias and installing factory made dry verge caps.
1. Make sure the waterproofing layer is functional.
2. Make sure the layout of the roof accommodates the desired amount of SolarStone modules. Install the bottom row(s) of regular roof tiles according to the design layout.
3. Place the metal U-bracket to rafters and fasten with self-tapping screws.
4. Start from the bottom left row and place the SolarStone module onto the batten and fit the module into interlocking brackets attached underneath.
5. Use 6cm self-tapping screws to secure the module in place. The module should interlock neatly with the adjacent roof tile.
6. Make sure the connectors from the junction box are not entangled.
7. Place another module onto the batten above and plug the connectors according to the specifications.
8. Place all the modules making sure all the connectors are properly plugged.
9. Finalise the rightmost column(s) with roof tiles.
10. Connect the wirings to the inverter according to the inverter manual.
BIPV SolarStone system is ready to power your home.